Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Heat Pump Installation Across Gresham Park
A full heat pump installation in Gresham Park typically runs $3,500 to $7,500 depending on home size, ductwork condition, and whether you’re replacing a furnace, a floor furnace, or retrofitting a home with no ductwork at all. We schedule most Gresham Park installations within 3 to 5 business days, and our crews know the mid-century floor plans, closet dimensions, and crawlspace quirks here better than any out-of-town crew ever could. Call (478) 400-5908 for a written quote before any work starts. We’re Dalton Heating & Air Sandy Springs, and we’ve been pulling permits and running new line sets through Gresham Park’s brick ranches and split levels for years.
Why Dalton Heating & Air Sandy Springs Is Gresham Park’s Preferred Heat Pump Installation Company
Homeowners in Gresham Park call us because we show up inside the stated window, put the price in writing before touching a single screw, and stand behind the work for a full year. Marco Benitez, our owner, insists on The Garrison Code on every job: arrive on time, price in writing, do the work by the book, leave the site clean, and back it for 365 days. That’s not a slogan. It’s the standard we’ve operated under since 2003 as a Garrison Partners location.
Gresham Park reviews mention the same things: technicians who respect the house, don’t track attic insulation through the hallway, and explain the load calculation instead of just handing over a quote. Our techs are background-checked and uniformed, and when you call, a live person answers. Not a voicemail queue. Not a callback window. A person who can tell you when the crew will be there and what they’ll do first.
We also know how Heat Pump Installation in Gresham Park differs from the same job in a newer subdivision. Our team has been through enough Gresham Park crawlspaces to know what’s standard here and what’s going to bite you later if it’s ignored.
Styles & brands we work with
Heat Pump Replacement in Gresham Park
Heat Pump Replacement in Gresham Park usually means pulling out a 40 to 60 year old furnace or aging heat pump and putting in equipment sized to the actual house, not the old unit’s nameplate. Most replacements here run $3,500 to $7,500, with the final number set by ductwork condition, electrical panel capacity, and whether asbestos abatement is required before new duct connections are made. A straight swap with existing ducts in good shape lands on the lower end. A replacement that requires new return-air paths, a larger line set, and crawlspace duct modification lands higher.
What a Gresham Park replacement actually involves
We start with a load calculation on the house, not a guess from the old system’s tonnage. Most 1950s and 1960s homes in Gresham Park were built with undersized ducts by today’s standards, which is why we measure static pressure before we order equipment. If the ducts can’t move enough air for a modern variable-speed blower, we modify or replace them rather than letting the new unit trip on high static pressure a year later.
When replacement makes more sense than repair
If your existing heat pump is more than 12 years old, uses R-22 refrigerant, or the compressor is failing, replacement usually beats repeated repairs. In Gresham Park’s humid summers, an older unit that’s still running often costs more to keep than it should because it’s cycling too long against the crawlspace heat load. We’ll show you the repair cost against the replacement cost and let the numbers decide.
Mini Split Installation in Gresham Park
Mini Split Installation in Gresham Park is often the right answer for the many homes here that never had central air, or that have additions, converted garages, or second floors the original ductwork never reached. A single-zone mini split usually runs $3,500 to $6,000. A multi-zone system covering three or four rooms runs $6,000 to $7,500 or more depending on line set runs and electrical work. The beauty of a mini split in Gresham Park is that it sidesteps the entire ductwork problem: no crawlspace abatement, no static pressure issues, no blower choking against a 14×8 plenum from 1962.
Where mini splits work best in Gresham Park homes
Rooms over garages, sunrooms, and finished attics are the typical candidates, especially in the brick ranches where the original HVAC system never reached those spaces. We also see mini splits going into Gresham Park homes still heated by floor furnaces, because running new ductwork through the crawlspace in those houses often costs more than installing two or three wall-mounted air handlers instead.
Noise and neighbor consideration
Outdoor mini split condensers are quiet, but in Gresham Park’s tighter lots, placement matters. Gresham Park has a 55-decibel daytime noise ordinance, and we set condensers where they won’t buzz against a neighbor’s bedroom window. We measure the property line, check setbacks, and put the outdoor unit on a pad that meets code without becoming a noise complaint.
Trusted Brands We Service in Gresham Park
We install and service Rheem, York, Daikin, and Bryant heat pumps, among others. Our factory training covers nine major residential brands, and we stock common Gresham Park parts locally so a replacement sensor or reversing valve doesn’t mean waiting on a warehouse across the country. If your existing system is a Bryant and you want to stay with Bryant, we’ll quote it that way. If a Rheem or Daikin better fits your ductwork and efficiency target, we’ll tell you why and put it in writing. No brand loyalty games. The right unit for your house, with a parts and labor warranty in writing.
See the difference
Before
After
Before
After
Before
AfterCommon Heat Pump Installation Problems We See in Gresham Park Homes
- Undersized original ductwork causing high static pressure: Most Gresham Park homes built from the 1950s through the 1970s have ducts sized for smaller, simpler systems. A new variable-speed blower pushing against those ducts can trip error codes and shorten motor life. We measure static pressure before installation and modify duct runs when the numbers say we must.
- Closet installations without proper return-air clearance: Many Gresham Park ranches put the air handler in a hall closet with a louvered door that barely meets minimum clearance. When the return path is too tight, the evaporator coil freezes up within a season. We check return-air sizing and often cut additional return grilles or add a jumper duct before the new unit goes in.
- Asbestos-wrapped ducts in crawlspaces: Gresham Park homes from this era frequently have asbestos tape on the original duct joints. We identify it before starting, coordinate licensed abatement when needed, and then run new duct sections. You don’t want a crew tearing out wrapped ducts without knowing what they’re dealing with.
- Outdoor units set too close to property lines: On Gresham Park’s smaller lots, we see condensers jammed between the house and the neighbor’s fence. Besides being against code and the 55-decibel ordinance, that placement kills airflow and drives up compressor heat. We relocate units to proper clearance and set them on code-compliant pads.
Pricing for Heat Pump Installation in Gresham Park, GA
Here’s what we actually quote in Gresham Park. A straightforward heat pump replacement with existing ductwork in usable shape runs $3,500 to $5,500. A full replacement with duct modifications, a new return-air path, and electrical panel work runs $5,000 to $7,500. A mini split system for a specific room or addition starts around $3,500 and climbs with the number of indoor heads. Our Heat Pump Installation team gives you a written line-item price before any work begins, and that price does not move unless the scope changes and you approve the change in writing first. Every job includes a written one-year guarantee, and if the installation fails during that year, we return at no charge. That’s The Garrison Standard. Call (478) 400-5908 for a free estimate, and we’ll walk your Gresham Park home with you before quoting anything.
We Also Serve Cities Near Gresham Park
Our crews cover Gresham Park and the surrounding DeKalb County area, including Sandy Springs, Kennesaw, Candler-McAfee, and Druid Hills. If you’re just outside Gresham Park, call and ask; we schedule by drive time, not by arbitrary territory lines. Dispatch runs from our Atlanta office, with local crews serving Gresham Park daily.
Serving Gresham Park, GA - Our Local Coverage Area
We’re based in the Gresham Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Gresham Park
Yes, and for most of those homes we recommend a ductless mini split system rather than trying to run new ductwork through a tight crawlspace. The floor furnace comes out, the crawlspace gets sealed and insulated where needed, and a multi-zone mini split gives you heating and cooling in each main room without the cost and demolition of new ducts. If you prefer a central system, we can specify new ductwork sized for the house, but that significantly raises the installed price.
Call (478) 400-5908 and we’ll walk the house with you and show you both options in writing.
We charge by manufacturer specification, using a digital manifold and subcooling method, not by the old “beer can cold” guess. Gresham Park’s high humidity means an overcharged or undercharged system loses dehumidification performance fast; a unit that’s cooling but not pulling moisture will leave your house feeling clammy. We verify superheat and subcooling to the manufacturer’s published numbers, and we record the exact charge on your invoice. Technicians who skip this step are the reason new heat pumps in DeKalb County sometimes underperform from day one.
We first measure the closet’s return-air opening and compare it to what the air handler needs. Most Gresham Park hall closets have a louvered door that’s nowhere near the required free area. We typically cut a return grille into the hallway wall or ceiling, add a jumper duct to a central return, and verify static pressure after the unit is running. If the closet is too small for any available air handler, we recommend a horizontal unit in the crawlspace or a mini split instead. We won’t install equipment that’s going to freeze the coil in July.
Not if it’s placed correctly. Gresham Park enforces a 55-decibel daytime noise limit, and most modern heat pump condensers run between 55 and 70 decibels under load depending on the model and distance. We position the unit at the required setback from property lines, orient the compressor away from neighboring bedrooms, and can specify lower-decibel models when the yard is tight. We measure the site before quoting the equipment so you don’t inherit a code violation or an angry neighbor.
Yes, and we won’t replace your system without one. Gresham Park’s 1960s brick ranches often have more heat gain than their original cooling systems were designed for, because the original equipment was often oversized to compensate. A Manual J load calculation uses your actual wall construction, window area, ceiling insulation, and crawlspace conditions to size the new unit correctly. Oversizing is just as bad as undersizing: short cycles, poor dehumidification, and higher electric bills. If a contractor quotes a replacement without doing a load calculation, that’s a red flag. Ask us for a copy of yours; we’ll give you the full report with your quote.
Written by Marco Benitez, Owner at Dalton Heating & Air Sandy Springs, serving Gresham Park and the surrounding DeKalb County area.