Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Gresham Park
Furnace repair in Gresham Park typically runs $150 – $700 depending on the part and the age of the system. Most calls we handle here are same-day or next-day, and every repair comes with a written price before any work starts plus a full-year written guarantee. If it fails in that time, we return free. Call (478) 400-5908 and a live person answers, 24/7.
Gresham Park’s housing stock throws curveballs at HVAC techs who don’t know the area. Homes built from the 1950s through the 1970s, with original ductwork and tight mechanical closets, won’t accept a modern part swap without some adaptation. Our crews work these older systems every week, and we’ve seen the specific failures these houses produce. Marco Benitez leads our dispatch team and makes sure the technician who arrives on your street in Gresham Park is background-checked, uniformed, and already briefed on the age and layout of your home’s heating system.
Why Dalton Heating & Air Sandy Springs Is Gresham Park’s Preferred Furnace Repair Company
Gresham Park homeowners call us because we write the price down before any work starts. That’s The Garrison Standard, and it’s been the rule at every Garrison Partners location since 2003. No door pricing, no add-on surprises, no “it’s actually more once we open it up.” The quote you get is the price you pay.
Reputation in the neighborhood matters more than anything. Homeowners off Flat Shoals Road and Cedar Ridge Drive have recommended us to their neighbors because we show up inside the stated window and leave the house clean. When a furnace repair doesn’t hold, the free second visit is part of the deal, not a negotiation. Our Furnace Repair team carries a specific loadout for Gresham Park: combustion analyzers for mid-century heat exchangers, capacitors and blower motors sized for old Carrier and Rheem units, and the patience to explain what’s actually wrong before touching a tool.
Response time to Gresham Park runs tight because we dispatch from the Atlanta metro office and our techs already know the grid. Every call is answered by a person, not a voicemail tree. Marco Benitez runs scheduling with a simple rule: if the window we give you shifts, we call before you have to call us.
Styles & brands we work with
Heat Pump Repair in Gresham Park
Heat Pump Repair in Gresham Park usually lands between $150 and $650, and the work is often the difference between a house that heats and cools and one that just blows air. A heat pump is a single system handling both jobs year-round, which means a small electrical failure shows up twice as fast here. Gresham Park’s humid summers push these units harder than the heating season does, and the pollen from the tree canopy along the creek lots gets into the outdoor coils and drives head pressure up until the compressor cuts out.
What a Heat Pump Repair Actually Involves
We start by checking the reversing valve, the defrost board, and the contactor. On older Gresham Park systems, the contactor is usually pitted from years of short-cycling, and the defrost sensor has failed open, which means the unit freezes in the one or two cold weeks we actually get. Fixing this early costs under $300 most of the time. Waiting until the compressor overheats can turn a small repair into a replacement conversation.
Signs You Need Heat Pump Service Here
If your electric bill jumped and the system runs constantly without changing the indoor temperature, something’s off. In Gresham Park, we also see units that ice over in winter because the drain pan is blocked with pollen sludge. Don’t chip the ice off yourself, that bends fins and can crack the coil. Call us and we’ll tell you honestly whether it’s a repair or just a cleaning of the outdoor coils.
Heating Repair in Gresham Park
Heating Repair in Gresham Park covers furnaces, floor furnaces, and gravity heaters, and it typically runs $150 – $700 on the parts and labor side. Many homes here still rely on original floor furnaces or wall heaters from the Kennedy era. Those systems can be repaired, but they need a tech who understands gas pressure, standing pilots, and the limits of 60-year-old heat exchangers. We won’t patch a cracked heat exchanger. If it’s done, we’ll tell you it’s done and give you a written quote for what’s next.
Furnace Tune-Up Before Problems Start
A tune-up runs $80 – $200 and includes a combustion analysis, gas pressure check, blower amp draw, and a visual on the heat exchanger. In Gresham Park, we recommend this before the first cold snap, not after, because a dormant pilot and a dirty thermocouple are cheap fixes in October and middle-of-the-night emergency calls in January.
Gas Valve and Ignitor Repairs
Gas valve repair and ignitor replacement are two of the most common fixes we do in Gresham Park. Ignitors fail on old Goodman and Bryant units after six to eight years, and a gas valve that won’t stay open is usually a sign of a clogged valve body or a bad thermopile on older floor furnaces. These jobs are straightforward for our techs and most land in the $180 – $420 range.
Blower Motor Replacement
Blower motor replacement on a 1960s or 1970s furnace means matching the amp draw and RPM to the original spec, not just bolting in whatever is on the truck. In Gresham Park’s crawlspace homes, an oversized blower will push static pressure past the limit and trip the new furnace’s safety switch. We size the motor to the ductwork, not the other way around.
Trusted Brands We Service in Gresham Park
Our techs are factory-trained on nine major residential brands, and in Gresham Park we service a lot of original Carrier and older Bryant equipment, plus newer Daikin and American Standard installs. You won’t hear us say “we don’t touch that brand.” We keep common parts for these systems stocked locally so a simple capacitor or ignitor swap doesn’t mean waiting on a warehouse. If you’ve got a Rheem from the 1990s or a Lennox that’s been hacked together by three different companies, we can straighten it out. The brand name matters less than the wiring and airflow behind it, and we fix the whole system, not just the part.
Common Furnace Repair Problems We See in Gresham Park Homes
- Short-cycling on original mid-century furnaces: We traced a Carrier on Cedar Ridge Drive that was calling for heat every four minutes. The capacitor was corroded and the blower motor was under-amping by 22%. We swapped the capacitor, rewired the control board, and recalibrated the thermostat so the system actually ran a full cycle instead of waking the homeowner up to a cold hallway.
- Cracked heat exchangers in brick-veneer homes: Tight 1960s construction holds carbon monoxide close. A tech who skips the combustion analysis will miss a hairline crack in a heat exchanger until it’s dangerous. We test every furnace we touch in Gresham Park, and if we find a crack, we shut the gas off and show you the reading.
- Pollen-packed blower wheels: The tree canopy around Bouldercrest Road and the creek lots puts a lot of pollen in the air. It gets past the filter, cakes onto the blower wheel, and cuts airflow enough to ice a coil even on mild December days. Cleaning this is part of a tune-up, and skipping it shortens the life of the motor.
- Static pressure problems from undersized ducts: A new high-efficiency furnace can’t breathe through 1960s supply lines. If a contractor swaps in a new unit without checking static pressure, the furnace will overheat and trip the limit switch all winter. We check the duct math before recommending any replacement.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Gresham Park, GA
Here are the honest line items for Gresham Park. Furnace repair lands between $150 and $700. A heat pump repair is $150 – $650. A tune-up is $80 – $200. The spread depends on the part and how deep the failure goes: a flame sensor runs low, a blower motor runs high, and a heat exchanger replacement on an old unit often pushes you into a replacement conversation. You’ll always get a written quote before any work begins. Estimates are free, and the written price includes the full-year guarantee.
| Service | Typical Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Heat Pump Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
We Also Serve Cities Near Gresham Park
Our crews handle furnace repair throughout the southeast metro, including Sandy Springs, Kennesaw, Candler-McAfee, and Druid Hills. If you’re just outside the Gresham Park line, call (478) 400-5908 and we’ll confirm the schedule. For neighborhood-level service detail, see Furnace Repair in Gresham Park.
Serving Gresham Park, GA - Our Local Coverage Area
We’re based in the Gresham Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Gresham Park
Yes, many do. Floor furnaces from the 1950s and 1960s use thermopiles, gas valves, and pilot assemblies that aren’t stocked by most supply houses anymore. We keep or can source original-spec parts for these units, and our techs know how to work on a floor furnace without tearing up your hardwood to get to it. Call (478) 400-5908 and we’ll tell you whether it’s repairable based on what you’re hearing and smelling.
It can legally stop a repair until the asbestos is handled. If your crawlspace has original asbestos-wrapped ducts and the repair requires disturbing that wrap, the abatement has to be done by a licensed crew before our techs can touch the blower motor or the plenum. We’ll identify it during the diagnosis, explain the sequence, and give you a written plan. This is common in Gresham Park’s 1950s and 1960s homes, and we’ve walked many homeowners through it.
Short-cycling in Gresham Park usually comes down to the house itself: original ductwork that’s undersized, dirty blower wheels from the tree pollen, or a thermostat that’s been miscalibrated for a single-zone system fighting an unbalanced floor plan. In Decatur, the housing stock and tree cover differ, so the failure mix is different. Here, we check static pressure and combustion first. A typical fix runs $150 – $400 if it’s a sensor, capacitor, or airflow issue.
Yes, up to a point. We can adjust damper positions, clean the blower, and in some cases add a return or resize a supply boot so the back bedrooms stop feeling like a walk-in cooler. What we can’t do is defeat physics: if the duct to the back of the ranch is a 4-inch line that was undersized in 1965, the real fix is a duct modification, not just a thermostat setting. We’ll show you the numbers and give you a written price before touching anything.
It depends on the failure. A $200 ignitor or flame sensor is worth fixing. A cracked heat exchanger on a 30-year-old unit is not, and we won’t repair it for liability reasons. At that point, you’re looking at a new system, and for Gresham Park’s older homes, the right move is often a dual-fuel or high-efficiency heat pump sized for the ductwork, not a like-for-like swap that’ll choke on those original supply lines. We’ll give you a straight answer and a written quote for either path.
Call Dalton Heating & Air Sandy Springs for Furnace Repair in Gresham Park
If your furnace is short-cycling, blowing lukewarm air, or making a sound you can’t place, call (478) 400-5908. A live person answers. We’ll schedule a window, show up on time, put the price in writing before any work, and guarantee the repair for a full year. That’s the deal for every Gresham Park homeowner, every call. Marco Benitez and the team run it that way because The Garrison Code says so, and because it’s the only way we’d want our own homes handled.
Written by Marco Benitez, Owner at Dalton Heating & Air Sandy Springs, serving Gresham Park with written pricing and a full-year guarantee on every repair.