Lennox Ductwork Repair Nationwide | Dalton Heating & Air Sandy Springs

Lennox Ductwork Repair: The Sandy Springs Owner’s Guide

We repair and replace Lennox ductwork in Sandy Springs for an installed price that typically runs $350 – $1,200 depending on what failed and how much of the run needs replacing. Most jobs are completed same day, and every repair carries our written one-year guarantee. You’ll usually discover the problem as a room that won’t hold temperature, a whistling noise behind a wall, or a utility bill that climbed for no obvious reason.

Call (478) 400-5908

Ductwork isn’t glamorous, but it’s the delivery system for every dollar your Lennox system spends. When a joint separates in an attic over Sandy Springs, your conditioned air is cooling the rafters instead of the hallway. Marco Benitez has crawled through enough attics off Abernathy Road and Mount Vernon Highway to tell you exactly what a failed duct section looks like: sagging flex runs, rusted collars, and tape that gave up three summers ago.

Which Lennox Models This Applies To

Ductwork isn’t model-specific the way a control board is, but it is system-specific. Your Lennox air handler or furnace moves a set amount of air measured in cubic feet per minute (CFM), and the duct sizing has to match it. A Lennox Elite series system moving 1,200 CFM needs a different duct diameter than a Merit series unit moving 800 CFM. When duct repairs are sized wrong, you get static pressure problems: noisy registers, short-cycling equipment, and blower motors that fail early.

For Lennox systems specifically, check the data plate on the air handler or furnace. It lists the model number and the required airflow rating. We use that rating, not a guess, to match replacement duct runs, collars, and plenum connections. When it comes to OEM versus aftermarket, most duct components don’t carry a Lennox part number at all. Flex duct, sheet metal fittings, mastic sealant, and collars are commodity materials. What matters is the gauge of metal, the R-value of the insulation on the flex, and whether the installer seals everything to code. A quality aftermarket flex duct with R-8 insulation beats a bare-metal run every time in a Georgia attic.

Signs Your Lennox Ductwork Repair Is Failing

• A room that’s always 5 degrees off. The duct serving that room has separated, kinked, or collapsed. Air is leaving the system somewhere before it reaches the register.
• A whistling or fluttering noise when the blower runs. Air is escaping through a gap in a joint or a tear in a flex run. The noise is the air finding the path of least resistance.
• Dust on the registers that keeps coming back. A return-side duct leak pulls attic air, insulation fibers, and dust into the system, then blows it through the house.
• Your upstairs is hot in July, fine in October. Attic ductwork in Sandy Springs gets baked all day. Marginal connections hold in mild weather and fail when the attic hits 130 degrees.
• Utility bills rose with no change in usage. Duct leaks of 20% or more are common in older homes, and that’s conditioned air you paid for leaving through the attic vents.

Replacement Cost & What’s Included

In Sandy Springs, most ductwork repairs run between $350 and $1,200 installed. A single separated joint that needs re-sealing and re-supporting might be on the lower end. A collapsed flex run that requires 20 feet of new R-8 duct, new hangers, and a new collar lands higher. If multiple runs are failing, we’ll price the whole job and show you what each section costs.

Every repair includes the written price before any work starts, the labor, the materials, and our full-year written guarantee. If the repair fails within that year, we return at no charge. That’s the Garrison Standard, and it’s not negotiable. We also service Carrier and Trane systems, so if you have mixed equipment, the truck’s already set up for it.

DIY or Call Us?

You can safely check a few things yourself. Feel the register in the problem room while the system runs. Is airflow weaker than other rooms? Check the visible ductwork in your attic or basement for sagging sections, loose tape, or obvious gaps. Take a photo if you see something, so we know what to expect.

What you shouldn’t do is climb into a hot Sandy Springs attic with a roll of duct tape and try a repair. Attic temperatures in July run 120 – 140 degrees, the structural members are not floor-rated, and flex duct that’s pulled even slightly wrong creates more problems than it solves. Also, worse: a poorly sealed return duct pulls attic air into your house, which is a real indoor air quality problem. Call us at (478) 400-5908. Tell me what it’s doing, and I’ll tell you what it costs, in writing, before we start.

FAQs