Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Heat Pump Installation for Sandy Springs Homeowners
A full heat pump installation in Sandy Springs typically runs $3,500 to $7,500, depending on how much Heat Pump Installation costs vary with the size of your home, the efficiency rating of the unit, and any ductwork modifications needed. Most installations are completed in one day when the existing ductwork is sound. If your system is over 12 years old or you’re tired of repair bills stacking up, Dalton Heating & Air Sandy Springs can have your home comfortable again with a written price before any work starts.
Marco Benitez leads our Sandy Springs team, and he’s held every job in the field before running one. We’ve operated under The Garrison Standard since 2003, which means one thing: the price we quote is the price you pay. No add-ons at the door. Every heat pump we install carries a 365-Day Done Right Promise, so if it’s not done right, we make it right. Call (478) 400-5908 anytime, day or night, and you’ll get a live person on the line.
Mini Split Installation
Mini Split Installation is a ductless heat pump option where a slim outdoor condenser pairs with one or more wall-mounted indoor units, letting you heat and cool individual rooms independently. Sandy Springs homes built before central air became standard, or additions like sunrooms and garage conversions, often need this approach because running new ductwork isn’t practical. The installed cost for a single-zone mini split generally falls between $3,500 and $7,500, and multi-zone setups vary based on how many indoor heads you need. Dalton Heating & Air Sandy Springs handles the full job: sizing, mounting, line set routing, and the electrical connection, all with a written price before we begin.
Sizing the Right Unit
We calculate load per room using square footage, window exposure, and ceiling height. In Sandy Springs, west-facing rooms in neighborhoods like Dunwoody and North Atlanta pick up serious afternoon heat, so we factor that in. A unit that’s too small runs constantly; one that’s too big short-cycles and leaves humidity behind.
Where the Condenser Goes
The outdoor unit needs clearance on all sides and a solid pad. We look at noise paths too, keeping the condenser away from bedroom windows where you’d hear it cycle at night. The line set run gets planned for the shortest practical distance to keep efficiency up.
Styles & brands we work with
Heat Pump Maintenance
Heat Pump Maintenance is a tune-up that keeps your system moving heat the way it’s designed to, twice a year is the right cadence since the unit works for both heating and cooling. In Sandy Springs, pollen season hits hard in spring and coats outdoor coils like a blanket, so skipping maintenance means your unit works harder and costs more to run. A full tune-up with a written report runs $80 to $200. Dalton Heating & Air Sandy Springs checks refrigerant charge, coil condition, electrical connections, condensate drainage, and airflow on every visit, and our techs aren’t paid on what they sell.
What the Report Shows
You get a written list of what we measured and what we found. If a part is wearing down, we show you before it fails, with a price to fix it now versus what an emergency call would cost. No pressure, just the facts.
Seasonal Checkpoints
Before summer, we verify the system can hit the temperature split you need on a 90-degree day, the kind of heat Sandy Springs regularly sees from June through August. Before winter, we check the reversing valve and defrost cycle so you’re not caught without heat when temperatures dip. Both visits are covered by the same flat rate.
Geothermal Heat Pump Installation
Geothermal Heat Pump Installation uses the steady temperature of the ground, about 55 degrees year-round in Sandy Springs soil, to move heat instead of burning fuel or fighting outdoor air. It’s the highest-efficiency option available, but it requires either a well field drilled vertically or horizontal loops trenched across your property. Because of the ground loop work, geothermal installations run meaningfully higher than air-source systems, typically starting around $7,500 and scaling from there based on loop depth and home size. Dalton Heating & Air Sandy Springs handles the interior heat pump and can coordinate the loop contractor so the whole job stays on schedule.
Is Your Lot a Fit
Horizontal loops need open ground, which works for larger properties in areas like Mountain Park or Vinings where yards stretch out. Vertical loops fit tighter lots because the pipe goes straight down instead of across. We assess your land before recommending a loop design.
Rebates and Paperwork
Geothermal qualifies for federal tax credits that run through 2032, and we document the system for your accountant. We also handle any utility rebate paperwork for your Sandy Springs address. The upfront number is bigger, but a geothermal system typically cuts heating and cooling bills by 25 to 50 percent.
Ductless Heat Pump Installation
Ductless Heat Pump Installation puts efficient heating and cooling into homes that don’t have ductwork, or into rooms that never got conditioned air. In Sandy Springs, older ranch homes and split-levels from the 1960s and 70s often have add-on rooms or converted garages that stay hot in summer and cold in winter. A typical single-zone ductless installation runs $3,500 to $7,500. Dalton Heating & Air Sandy Springs mounts the indoor unit, runs the line set through a small wall opening, and wires the system to your panel, all with a written price in hand before any work starts.
Single Versus Multi-Zone
A single-zone setup serves one room, a sunroom, or a master suite. Multi-zone systems connect up to four or five indoor heads to one outdoor unit, which gives each room its own temperature setting. We help you map out which rooms actually need conditioned air so you’re not spending on zones you’ll rarely use.
Condensate Line Routing
Ductless units pull moisture out of the air, and that water needs a path out. We route the condensate line to a drain or outside, never letting it drip down your wall or into the wall cavity. A proper slope keeps mold and water damage out of the picture years down the road.
Heat Pump Service
Heat Pump Service is the repair and diagnostic work that keeps an existing system running, and it covers everything from refrigerant leaks to failed reversing valves to dead capacitors. In Sandy Springs, a heat pump that won’t switch modes is often a reversing valve issue, and a unit that runs but won’t reach temperature usually points to low refrigerant. Most heat pump repairs run $150 to $650 depending on the part. Dalton Heating & Air Sandy Springs answers the phone 24/7 with a live person, and every repair gets a written guarantee for a full year, no exceptions.
What We Diagnose First
We start with the thermostat call, then check line voltage, then test capacitor strength and refrigerant pressures. A lot of companies replace parts one at a time and hope. We find the failed component before we quote anything, so you’re not paying for a guess.
When Repair Beats Replacement
If your system is under ten years old and the compressor is healthy, a repair almost always makes more sense than a new unit. We tell you straight what the fix costs and what a replacement would cost, then you decide. No push either way, just numbers on paper.
Heat Pump Replacement
Heat Pump Replacement means removing your old outdoor and indoor units and installing a new, matched system. In Sandy Springs, the humidity and heat load mean systems tend to last 12 to 15 years, and if yours is beyond that or the compressor has failed, replacement is the honest call. A straightforward heat pump replacement in Sandy Springs typically runs $3,500 to $7,500. Dalton Heating & Air Sandy Springs quotes the full scope in writing: new equipment, new line set, any needed electrical upgrades, and haul-away of the old system.
Matched Systems Matter
An outdoor unit from one brand and an indoor coil from another can work, but never at rated efficiency. We install matched systems so the SEER2 rating on the box is what you actually get. That keeps your utility bills in line with what you were promised.
What We Haul Away
The old condenser, coil, and line set leave your property. We also recover refrigerant by EPA rules, which means no venting to the atmosphere. The area around the unit gets cleaned up before we pack out, same as we found it or better.
Brands We Service
Our technicians are factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment. That means when a Daikin heat pump has an inverter board question, we know the sequence of operation without guessing. We stock common OEM parts for Bryant and American Standard units because those brands show up in a lot of Sandy Springs homes.
Carrier variable-speed units need a different setup process than a single-stage Goodman, and we configure each system according to the manufacturer’s installation manual, not habit. Whether you have a Daikin, a Bryant, or any other make, we can install it right and stand behind it for a full year.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your heat pump runs constantly but won’t hit the set temperature. This usually means low refrigerant or a failing compressor. In Sandy Springs summer humidity, an overworked unit drives up your bill and shortens the system’s life.
- Ice builds on the outdoor unit in cooling mode. A frozen coil can point to refrigerant loss, a bad defrost board, or blocked airflow. Running it iced up can destroy the compressor, which is a $1,500-plus repair we’d rather you avoid.
- The system trips its breaker more than once. A heat pump that keeps tripping the breaker has an electrical fault, often a failing capacitor, a grounded compressor, or a wiring short. This is a fire hazard, not just a comfort problem.
- You hear grinding, squealing, or banging from the outdoor unit. Those sounds mean a motor bearing is failing or a fan blade is hitting something. The sooner we catch it, the less likely you’ll need a full replacement.
- One room stays hot or cold no matter what the thermostat says. That’s a duct or airflow problem, or a unit that’s mismatched to the space. We can diagnose whether it’s the system, the ductwork, or the layout before recommending a fix.
Our Process, Step by Step
- 1
A live person takes your call, 24/7. You describe what’s happening, and we schedule a window that works for your day. The technician’s name and arrival window are confirmed before we send anyone out.
- 2
The tech arrives inside the stated window. Uniformed, background-checked, and driving a marked van. We start with a walk-through of the system and your concerns, then run a full diagnostic using manifold gauges, an amp meter, and a temperature split check.
- 3
You get a written price before any work starts. If it’s a repair, you see the exact part and labor cost. If it’s a replacement or installation, you get a line-item quote with equipment model numbers. No work happens until you approve the number on paper.
- 4
The job gets done by the book. We follow the manufacturer’s installation manual and local code requirements for Sandy Springs. Electrical connections get torqued to spec, line sets get pressure-tested and evacuated, and the system gets commissioned with actual measured temperatures, not assumptions.
- 5
We walk you through the work and leave the site clean. You see what we found, what we fixed, and how to run the system. The written guarantee on every repair comes with the paperwork, and if anything fails within the year, we return at no charge under the 365-Day Done Right Promise.
How Much Does Heat Pump Installation Cost in Sandy Springs?
A typical heat pump installation in Sandy Springs runs $3,500 to $7,500. The spread comes down to three things: the efficiency rating of the unit (higher SEER2 costs more up front), the size of your home (a 3,000-square-foot house in Dunwoody needs more capacity than an 1,100-square-foot ranch in Chamblee), and the condition of your existing ductwork and electrical service. If your ducts are leaky or your panel lacks capacity, that work gets added to the quote, which is why we show you every line item before you commit.
What affects the price most is the efficiency tier and the brand. A base-model 14 SEER2 unit costs less than an 18 SEER2 variable-speed unit, but operating costs are higher. We walk you through the math on both options. To avoid overpaying, get a written quote that lists the exact model numbers, not just a lump sum. A free estimate from Dalton Heating & Air Sandy Springs includes measurements of your home’s heat load, a duct inspection, and a fixed price good for 30 days, so the number doesn’t move after you shake hands.
Our Service Area Near Sandy Springs
We serve Sandy Springs and the surrounding communities, including Dunwoody, Chamblee, Roswell, North Atlanta, Doraville, Mountain Park, Druid Hills, Gresham Park, and Vinings. Most calls in Sandy Springs proper get a same-visit response, and nearby areas are typically reached within an hour. If you’re considering a Heat Pump Installation in Kennesaw or a Heat Pump Installation in Candler-McAfee, we cover those areas too. From our home base, the same written-pricing standard applies on every job, in every zip code we serve.
Serving Sandy Springs, GA - Our Local Coverage Area
We’re based in the Sandy Springs area and know this community well, and we also handle Kennesaw Heat Pump Installation. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Heat Pump Installation in Sandy Springs
A heat pump installation is the process of replacing or adding a system that moves heat between your home and the outside air, providing both heating and cooling from one unit. The job includes removing old equipment if present, placing the outdoor condenser, connecting the indoor coil or air handler, running the refrigerant line set, and wiring the system to your electrical panel. In Sandy Springs, where winters stay mild and summers run hot and humid, a heat pump is often the most efficient single system for year-round comfort.
Most straight swap installations in Sandy Springs take one full day, about six to eight hours. If we’re adding new ductwork, upgrading your electrical panel, or installing a ductless multi-zone system, the job can run two days. We give you a written schedule before we start so you know when the system will be running and when the crew will be out of your house.
A typical heat pump installation in Sandy Springs runs $3,500 to $7,500. The final number depends on the unit’s efficiency rating, your home’s size, and the condition of your existing ductwork and electrical service. Call (478) 400-5908 for an exact quote, estimates are free and good for 30 days.
Yes, we install and service Daikin, Bryant, American Standard, and the other major brands including Carrier. Our technicians are factory-trained on all nine major residential HVAC brands, and we stock common OEM parts for the brands we see most often in Sandy Springs. Whether you have a specific brand in mind or want our recommendation, we can quote the job in writing.
If your system has failed and you need a replacement, we can often schedule your installation within 24 to 48 hours, depending on equipment availability. Every call is answered by a live person 24/7, and we’ll give you a straight answer about when we can be there. For urgent situations, call (478) 400-5908 and we’ll work with you on timing.
Every installation from Dalton Heating & Air Sandy Springs carries our 365-Day Done Right Promise: if it’s not done right, we make it right within a full year. On top of that, the manufacturer’s parts warranty applies, typically five to ten years depending on the brand and model. All warranty terms are in writing before you sign anything.
Clear a path to your existing equipment, both the indoor unit or furnace and the outdoor condenser. Move anything stored within three feet of the outdoor unit, like trash bins or yard tools. We’ll handle the rest, including protecting floors and cleaning up after the job is done.
Schedule Your Heat Pump Installation Service in Sandy Springs Today
You’ll get a written price before any work begins, a set install date, and a full year of coverage under the 365-Day Done Right Promise. No guesswork, no pressure. Call (478) 400-5908 now for a free, no-obligation estimate, and talk to a real person any hour of the day or night.
Written by Marco Benitez, Owner at Dalton Heating & Air Sandy Springs, serving Sandy Springs since 2003.