A Dalton company - serving Sandy Springs, GA

Lennox HVAC in Sandy Springs, GA

Furnace & heatingFurnace & heating
AC repairAC repair
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

Your new heating and cooling system for as low as$119/month*On approved credit; ask for current terms

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Lennox HVAC in Sandy Springs, GA | Dalton Heating & Air Sandy Springs

We provide independent Lennox repair, maintenance, and installation across Sandy Springs, with same-day service available for most our AC Repair in Sandy Springs and furnace calls. What makes our Lennox work different here is simple: we’ve spent years fixing Lennox systems on the exact terrain Sandy Springs throws at them, from River Corridor humidity to steep backyard lots. Call (478) 400-5908 and you’ll get a written price before any work starts, no exceptions.

Call (478) 400-5908

Dalton Heating & Air Sandy Springs is part of the Garrison Partners network, operating under The Garrison Standard since 2003. Marco Benitez leads our Sandy Springs crew, and while we’re not a Lennox dealer or manufacturer affiliate, we service Lennox equipment with the same discipline we bring to eight other major brands. If you need Lennox sales & service from a team that treats your system like the investment it is, we’re ready.

Why Sandy Springs Residents Choose Us for Lennox Service

Most homeowners don’t care whether the tech has a Lennox badge on his shirt. They care whether he can diagnose the problem correctly the first time and put the price in writing before turning a single bolt. That’s the standard Marco Benitez holds every call to. Marco cut his teeth in HVAC at Los Angeles Trade-Technical College and spent the better part of two decades working systems across the Southeast before settling in Sandy Springs. He’s the one walking homeowners through what failed, why it failed, and what it costs, in plain English.

We service every Lennox line you’re likely to have in Sandy Springs, from older 13 SEER single-stage units to the variable-capacity XC25 and XP25 platforms. We stock OEM Lennox parts where they matter most: inverter boards, gas valves, control boards, and thermostats. For non-critical components, we use exact-match aftermarket equivalents that meet the same spec at lower cost. Every repair includes a written guarantee for a full year. If it fails within that window, we return at no charge. That’s the 365-Day Done Right Promise, and it applies to every Lennox service call we run in Sandy Springs.

Explore

Styles & brands we work with

AC repair
AC repair
Furnace & heating
Furnace & heating
Heat pumps
Heat pumps
Ductless mini splits
Ductless mini splits
Carrier
Carrier
Trane
Trane
Goodman
Goodman

Common Lennox HVAC Problems We Solve in Sandy Springs

  • iComfort S30 thermostat losing communication with the air handler. We see this constantly in Sandy Springs neighborhoods with heavy tree cover, where the condenser short-cycles and the communicating thermostat drops its signal. The fix is usually the communication wire, not the stat itself. We check both before quoting anything.
  • XC25 inverter board failure after summer thunderstorms. The Chattahoochee corridor gets dramatic lightning events, and power surges are brutal on Lennox’s variable-speed inverter boards. Homes without a surge protector on the disconnect are the most vulnerable. If your XC25 just stopped cooling after a storm, this is the first thing we check.
  • EL296V gas valve sticking after months of inactivity. Sandy Springs winters are mild enough that furnaces sit idle from March to November. When the first freezing night hits, gas valves that haven’t cycled in eight months can stick. The no-heat call on that first cold snap is practically a local tradition.
  • Drain pan cracks on older Lennox air handlers in humid crawlspaces. Homes near the river, especially in the Riverside Drive corridor, run crawlspace humidity levels that eat through plastic drain pans over time. Cracked pans leak onto floors and into slab penetrations. It’s a straightforward replacement if caught early.
  • Clogged condenser coils from spring pollen and riverbank foliage. Sandy Springs is green for a reason. Pollen season packs Lennox condensers with a yellow film that kills heat transfer efficiency, and overgrown riverbank vegetation makes airflow worse. We see units running 15 degrees hotter than they should because of this.

Lennox Service in Sandy Springs: What Local Conditions Mean for Your Equipment

On Riverside Drive’s steep lots, Lennox condensers often sit on decaying wooden platforms with restricted airflow from overgrown riverbank foliage. That combination drives up head pressure and kills XC25 inverter boards faster than anywhere else in Sandy Springs. We’ve pulled condenser platforms that were more rot than wood, held together by paint and wishful thinking. When the unit can’t breathe, the inverter works harder, runs hotter, and fails sooner. It’s not a design flaw in the Lennox, it’s a site condition. Part of every Riverside Drive service call is checking platform stability and foliage clearance around the condenser. If you live on a sloped lot anywhere in Sandy Springs, that platform is worth a look before July.

One field vignette worth sharing: our tech traced an XC25 short-cycling complaint on a Riverside Drive split-level to a clogged condenser coil. The backyard was so steep we had to rope the unit to a tree just to open the service panel. After cleaning the coil and replacing the iComfort S30 communication wire that had corroded from Chattahoochee humidity, the system held a 20-degree delta T. No new board needed. Just access, cleaning, and the right diagnosis. That’s the kind of call that separates a parts-swapper from a technician.

Lennox Models & Products We Service in Sandy Springs

We work on the full Lennox residential lineup, with deep hands-on time on the variable-capacity and communicating platforms most independent shops don’t see outside warranty work. The XC25 variable-capacity air conditioner, EL296V two-stage gas furnace, XP25 heat pump, and SLP98V variable-capacity gas furnace are all in our regular rotation across Sandy Springs, and Sandy Springs Heat Pump Installation is a core part of our work. That includes older Lennox systems from the early 2000s still running in ranch and split-level homes, often paired with original ductwork in slab or crawl spaces.

For parts, we take a straightforward approach: OEM Lennox components for critical electronics like inverter boards and gas valves, exact-match aftermarket equivalents for everything else where the spec is identical. We stock the most common Lennox parts locally so a Sandy Springs repair doesn’t wait on a warehouse three states away. If we have to order something unusual, we’ll tell you honestly when it lands before we schedule the callback.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Lennox Service Pricing in Sandy Springs

Here’s what Lennox service actually costs in Sandy Springs, based on the calls we run every week:

Service Typical Price Range
AC Repair $150 – $650
Furnace Repair $150 – $700
AC Installation $3,500 – $7,500
Tune-Up $80 – $200

What drives the cost is the part and the access. A capacitor replacement on a flat lot runs toward the low end. An inverter board replacement on a steep Riverside Drive backyard, where we need to stage equipment and work around the terrain, runs higher. Your estimate is free and it’s in writing before we start. The price Marco quotes is the price you pay, period. Call (478) 400-5908 for exact numbers on your system.

Serving Sandy Springs, GA - Our Local Coverage Area

We’re based in the Sandy Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs – Lennox HVAC in Sandy Springs

Service Areas Near Sandy Springs

We run Lennox service calls throughout Sandy Springs and the surrounding communities. That includes Sandy Springs service area coverage from Riverside Drive to the Perimeter, plus Lennox service in Kennesaw, Lennox service in Candler-McAfee, Druid Hills, Mountain Park, and Gresham Park. If you’re within a 30-minute drive of our shop, we’re likely already working your neighborhood.

Book Your Lennox Service in Sandy Springs Today

Call (478) 400-5908 and you’ll talk to a live person, 24/7. We’ll schedule you inside a stated window, show up on time, and put the price in writing before any work begins. Same-day Lennox service is available for most AC and furnace calls across Sandy Springs.

Written by Marco Benitez, Owner at Dalton Heating & Air Sandy Springs, serving Sandy Springs since 2003.

Need HVAC help in Sandy Springs? Licensed & insured · 30-60 min response · free estimates
Call (478) 400-5908
Local Service Coverage

Request a Free Estimate in Sandy Springs

Tell us what you need - Dalton Heating & Air Sandy Springs responds fast. No obligation.

By sending this request, you accept our Privacy Policy and agree to be contacted by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch